- 41 -
© 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS851 User’s Manual
3.3.4 Code 32 Prefix
Enable this parameter to add the prefix character “A” to all Code 32 bar codes.
Convert Code 39 to Code 32 must be enabled for this parameter to function.
3.3.5 Set Lengths for Code 39
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Lengths for Code 39
may be set for any length, one or two discrete lengths, or lengths within a
specific range. If Code 39 Full ASCII is enabled,
Length Within a Range
or
Any Length
are the preferred options.
NOTE
When setting lengths, single digit numbers must always be preceded by a
leading zero.
One Discrete Length
- This option limits decodes to only those Code 39
symbols containing a selected length. Lengths are selected from the numeric
. For example, to decode only Code 39
symbols with 14 characters, scan
Code 39 - One Discrete Length
, then scan
1
followed by
4
. To change the selection or cancel an incorrect entry, scan
.