Unitech MS836B Page 23 User Manual Download

Page: 23 / 122

- 6 -

unitech is a registered trademark of unitech Electronics Co., Ltd.

All product and company names are trademarks, service marks, or registered trademarks of their respective owners

MS836B User’s Manual

1.4 Getting Started

1.4.1 How to pair the scanner with the receiver

￭

LED Description

Green Light

Slow flash

Scanner is not connected to receiver or USB.

Flash

Scanner is connected to receiver or USB.

Quick flash

Entering the pairing mode.

Flash once

Flash once : Scanned data being uploaded

successfully.

Scanner Turn on

: Long press the trigger key for 2 seconds until you hear a

long beep sound.

Connect the USB receiver to the

host. Plug the USB Receiver to a

free USB port of a host computer.

The MS836B is now ready to use.

Summary of Contents for MS836B



























































































































Search results

Summary of Contents for MS836B

Reviews:

Related manuals for MS836B

Brands by name

Popular brands

Unitech MS836B, User Manual

Search results

Summary of Contents for MS836B

Reviews:

Related manuals for MS836B

Brands by name

Popular brands