Unitech MS836B Page 18 User Manual Download

Page: 18 / 122

- 1 -

unitech is a registered trademark of unitech Electronics Co., Ltd.

All product and company names are trademarks, service marks, or registered trademarks of their respective owners

MS836B User’s Manual

Chapter 1 - Overview

1.1 Package

Please make sure the following contents are in the MS836B gift box.

If something is missing or damaged, please contact your Unitech

representative.

The package contents (without cradle):



MS836B Scanner with Battery



USB Type C Charging Cable



2.4G Receiver



Quick Start Guide



Regulatory Compliance Statements

Note: Please charge with USB Type-C cable.

NOTE:

The barcode with an asterisk (*) which appears in the following chapters

indicates that it is the default option for the corresponding setting.

Summary of Contents for MS836B



























































































































Search results

Summary of Contents for MS836B

Reviews:

Related manuals for MS836B

Brands by name

Popular brands

Unitech MS836B, User Manual

Search results

Summary of Contents for MS836B

Reviews:

Related manuals for MS836B

Brands by name

Popular brands