S
CANNER
O
PERATION
Host Scanner Commands
³
1
1
8
0
1
5
Enable D/E Disable Command.
- The scanner will
disable scanning after it receives an ASCII “D” from
the host device. It will enable scanning when it
receives an ASCII “E”.
³
1
1
8
0
0
5
* Disable D/E Disable.
³
1
1
8
2
1
1
Enable Z/R Type D/E Simulation
- The scanner
will disable scanning after it receives an ASCII “Z”
from the host device. It will enable scanning when it
receives an ASCII “R”.
³
1
1
8
2
0
1
* No Z/R Type D/E Simulation
³
1
1
8
0
1
4
Enable F/L Laser Command
- The scanner will
turn
off
the laser after the scanner receives an
ASCII “F” character. The laser will turn
on
after it
receives an ASCII “L” character.
³
1
1
8
0
0
4
* Disable F/L Laser Command
³
1
1
8
1
1
5
Use DTR Scan Disable
- The scanner will monitor
the DTR input to determine if scanning should be
allowed. A +12V “active” level enables decoding.
A -12V “inactive” level disables decoding.
³
1
1
8
1
0
5
* Do Not Use DTR Scan Disable
- Do not monitor
the DTR input.
³
1
1
8
1
1
0
Activate DC2 Character
- Scanning will be initiated
with the receipt of a DC2 character (^R, 124).
³
1
1
8
1
0
0
* Do Not Activate on DC2 Character
9
