background image

1

4

        

                                                                        

M

S240/241

 Manual

Magnetic Reader, continued

Track 2 Account Number Only

If only track 2 is enabled (see previous page), only the account
number from track 2 and the start/stop sentinels are output.
If tracks other than track 2 are enabled, this parameter actually
outputs all the other track’s data, the account number from track 2,
and their start/stop sentinels.
Default is “No”.

Separator Character

Insert one character between each track’s output.
Pre-defined characters include:

The above special characters must be bracketed by < > symbols as
shown.
Function codes (F keys, Cursor up, Enter, etc.) can also be inserted
via hexadecimal code (accessable in a linked menu) and must
include surrounding brackets (<>).
Letters and numbers should be entered directly by keyboard input
without surrounding brackets (<>).
Default is “None”.

<t>:  Tab

<n>:  Line Feed

<d>:  Any Digit (not applicable to this function)

<a>:  Any Letter (not applicable to this function)

<*>:  Interblock Delay (not applicable to this function)

<“>:  “ (quotation marks)

<dd>:  character in hexadecimal notation

<<>:  <

<>>:  >

Output Only When All Tracks Have Correct Data

A useful function for insuring data integrity, this function can cause
trouble when the card reader tries to read more tracks than are on the
card.
Default is “No”.

Summary of Contents for MS240






























Reviews: