QUICK START MENU
-17-
DETECTION TIMER
0
2
4
6
8
10
12
14
16
18
20
22
24
SUN
MON
TUE
WED
THU
FRI
SAT
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
MOVE
SELECT
X axis:
0 ~ 24 hours. Each time interval within a square is two hours (divided into four 30-minutes).
Y axis:
Monday ~ Sunday.
Operation:
Move the cursor to the start time point, and press enter to set the start time point (marked in red color).
Then, press
▲
▼◄
►
button to set the timer-recording schedule. After setup, press enter button again to create an
ending time point (marked in yellow color) and press MENU button to exit.
Note:
This function here is only for detection timer setup and activation. For motion detection function
setup and activation, please refer to section “7.1.2 Detection” at page “20”
6.4 Date
In this menu list, you can set up the system date and time for this device.
Press MENU button to enter the main menu list. Move the cursor to
icon and you will see the following
screen:
QUICK START
CHANNEL TITLE
ON
EVENT STATUS
ON
ON
IMAGE SIZE
CIF
QUALITY
BEST
IMAGE PER SECOND
120
RECORD TIMER
OFF
DETECTION TIMER
OFF
DATE
2007 / AUG / 08 21 : 30 : 00
FORMAT
Y / M / D
DAYLIGHT SAVING
OFF
ADVANCE
SELECT
BACK
NEXT
ENTER
