HT580 User Reference Guide
Unitech Electronic CO. LTD
Unitech Part Number: 400412
11
Chapter 2 - Operating the HT580
After powering on the HT580, you will see the Main Menu as below:
2.1 Setting System
Press [
1
] or
[
MENU
] to enter”
SETTING
” category. There you will see the following four options:
1. DATE & TIME, 2. DEVICE, 3. MODEM INIT, 4. SUPERVISOR
2.1.1
DATE & TIME:
Press [
1
] or [
MENU
] to enter the DATE & TIME category to set the correct date and time. The page will
appear as it is shown below:
Press numeric keys to input correct date and time. Once complete, press
[ENTER]
to save the revised
settings. To return to the previous menu, press
[
ESC
]
.
2.1.2
DEVICE
When you select device setting, you will be able to see three settings as shown below:
2.1.2-1 <BACKLIGHT>
Press [1] or [scan] to enter <BACKLIGHT> mode and to press [
ESC
] to go back to the device
setting mode.
<
BACKLIGHT
> selection: press [
MENU
] to scroll down on your preferred mode of backlight duration as
ON 10 SECS / ON 20 SECS / ON 30 SECS / ON 60 SECS / Always OFF
Once you select the preference for backlight duration, press
[ENTER]
to complete the setting.
Note:
Selecting “ON 10 SECS“ means that backlight remains active for 10 seconds. The default may be
reset if you press any key while the backlight is active.
HT580 V1.06
1. SETTING
2. FORMCACHING
3. RUN APG580
YYYY-MM-DD
2000-01-08
HH-MM-SS
05:50:35
1. BACKLIGHT
2. SCANNER
3. AUTORUN
