Pull the plastic sheet and lift upward to remove the battery.
WARNING!
There is a risk of fire and burns if the battery is handled improperly.
DO NOT disassemble, crush, puncture, short external contacts, or
dispose the battery pack in fire or water.
DO NOT attempt to open or service the battery.
Dispose of used batteries according to local recycling guidelines in
your area.
CAUTION!
To ensure the unit works properly, please keep all connectors away
from the contaminants staying inside of them such as dust, grease,
mud, and water.
The negligence may cause the unit with no communication, short
circuited, Overheated and so on. If the connector is damaged, please
ensure the connector is being fully repaired before using the unit to
avoid causing short circuits.
1.
Thread the end of the wrist lanyard through the
wrist lanyard holes on the bottom of the gun grip.
2.
Pull the other end of the wrist lanyard through the
loop on the threaded end.
Learn more about other 3730E UHF accessories
:
If you would like to charge the terminal with other
3730E UHF accessories, such as 1-Slot / 4-Slot Charging
Cradle, 1-Slot USB Cradle, 1-Slot / 4-Slot Ethernet Cradle,
or charging the battery with the 3730E four slot battery
charger, please scan the barcode below to download
related files:
Remove the Battery
Attach the Wrist Lanyard
