9
www.csunitec.com
Original instructions VARILEX
®
1802 HT
EN
VARILEX
®
1802 HT
Max. disc diameter
Ø
D
mm (in)
150 (6)
Max. permitted thickness of the
clamping shank on accessory when
using clamping nut (A8-4/B12-4)
t
max,1
mm (in)
10 (
3
/
8
)
Roughing disc/cutting disc:
max. permitted disc
thickness
t
max,2
mm (in)
7.1 (
9
/
32
)
S
pindle thread / length of grinding spind
le
e
M / l
– / mm (in)
M 14 (5/8“-11 UNC) / 20 (25/32)
No-load speed (maximum speed)
n
min
-1
(rpm)
9,600
No-load speed (adjustable)
n
V
2,400
Rated input power
P
1
W
1,750
Power output
P
2
W
1,070
Weight without mains cable / Weight
with smallest battery pack
m
kg (lbs)
2.6 (5.7)
Emission values:
Vibration emission value (surface
grinding) / uncertainty (vibration)
a
h, SG
/ K
h,SG
m/s
2
8.2 / 1.5
Vibration emission value (sanding with
sanding plate) / uncertainty (vibration)
a
h, DS
/ K
h,DS
m/s
2
4.0 / 1.5
Typical A-effective perceived sound levels:
Sound-pressure level / uncertainty
L
pA
/ K
pA
dB(A)
94 / 3
Acoustic power level / uncertainty
L
WA
/ K
WA
dB(A)
105 / 3
7. Technical data
Subject to change in accordance with technical
progress.
Measured values determined in conformity with
EN 60745.
Direct current (cordless
machines)
Alternating current (mains
powered machines)
Machine in protection class II
(mains powered machines)
During operation the noise level can exceed 80 dB(A).
Wear ear protectors!
High-energy, high-frequency interferences can
cause speed fluctuations. The fluctuations
disappear, however, as soon as the interference
fades away. The technical specifications quoted
are subject to tolerances (in com-pliance with
the relevant valid standards).
Emission values:
These values make it
possible to assess the emissions from the
power tool and to compare different power
tools. The actual load may be higher or lower
depending on the operating conditions, the
condition of the power tool or the accessories.
Please allow for breaks and periods for
assessment purposes when the load is lower.
Arrange protective measures for the user, such
as organisational measures based on the
adjusted estimates.
Vibration total value (vector sum of three
directions) determined in accordance with EN
60745:
1-800-700-5919 (US/CA)
www.csunitec.com
+1-203-853-9522 (Intl.)
