English
8
BATTERY & ADAPTER INSTALLATION
Home Receiver Unit:
Main Power Source: Plug in the 6.0V adapter
into
the adapter socket
at the back for basic operation
and continuous backlight.
Backup Power: Open the battery door
, install
3 pieces of AAA backup batteries according to the
polarity indicated, close the battery cover
.
Remote Sensor:
Loosen the screws
on the battery door
with a
small screwdriver, insert 2 pieces of AAA batteries
according to the polarity indicated. Replace the cover
and tighten the screws
.
INITIAL SETTING
After battery installation of the main unit, the wea-
ther icons
(H)
will flash. Press “UP”
or “DOWN”
to select local weather condition as initial setting.
Press [CLOCK]
to confirm and exit.
(Refer “WEATHER FORECAST” section for details)
SETTING UP THE WIRELESS
THERMO-HYGROMETER
For the first installation, always turn on the home
unit and then the remote sensor. Set
Channel 1
for remote sensor. Set channel 2 and channel 3 for
the 2nd and 3rd sensor (313505.00 / W186-F).
•
Press and hold [SNOOZE/CHANNEL/LIGHT]
button on main unit until a beep is sound to search
for remote sensor. Temperature
(D)
& humidity
readings
(E)
will flash indicating it is in the
searching mode
•
Press the [Tx]
button on the back of remote
sensor to transmit RF signal.
•
When RF connection is established, the
respective temperature & humidity of the
selected channel will appear on the main unit.
Note:
•
If using the remote sensor outdoors, it should not be
directly exposed to weather influences such as rain,
for example.
Designation of display functions in the main unit
A
Radio-controlled clock
B
Trend / tendency display
C
Channel number
D
Indoor / outdoor temperature
E
Indoor / outdoor humidity
F
Battery display
G
Animated color graphs
H
Weather forecast with icons
I
Alarm icon
J
Time / date display
Designation of display functions in the sensor
K
Channel display
L
Transmission icon
M
Humidity
N
Temperature
K
A
C
B
D
L
N
J
I
H
G
F
E
M
Main unit
Remote sensor
313508_W193_Manual_130215.indd 8
27.02.13 12:49