Unit UVC-5220, Instruction Manual

Page: 8 / 16

8
Rechargeable vacuum cleaner | UVC-5220
ENGLISH
OPERATION OF THE DEVICE
1. The battery should be fully charged.
2. To activate the vacuum cleaner, press and hold for 1 second the on/off button (2).
3. If you want to increase the suction power, press the power button (2) again.
4. After cleaning, press the button (2) to turn off the vacuum cleaner.
Cleaning area LED-light allows to clean half-light places under tables, beds and sofas better.
CLEANING AND MAINTENANCE
Control the filling of the dust collector. As soon as the amount of debris in the
container reaches the «Max» mark is required to clean the dust collector.
1. Turn off the vacuum cleaner.
2. Disconnect the extension tube and a turbo brush.
3. Press the button (1) to disconnect dust collector from the vacuum cleaner.
4. Click on the cover lock of dust collector. Open it and remove the debris.
5. Turn the lid of the filters and align the color label on the lid marked «Open» on the
housing of the dust collector.
6. Open the dust collector and remove all filters.
7. Rinse the filters and the housing of the dust collector under running water.
8. When the body of the dust collector and the filter has fully dried, assemble the dust
collector.
9. Install the lid of the filter housing of the dust collector and turn it until it stops by
aligning the color label on it labeled «Lock» on the body of the dust collector.
CLEANING THE TURBO BRUSH
1. Open the latch of the brush.
2. Remove the plastic bar, and then remove the brush.
3. Remove the tangled on the brush hair, thread and other debris.
4. Rinse the brush under running water and give it time to dry.
5. Install the brush into place and secure the latch.