14
Understanding Status Signals
The UEC 6000 or UEC 7000 comes equipped with default light and sound signals described below.
Default Light Signals:
The unit’s status is shown through a single, multi-state LED (light emitting diode)—the light on the top,
front, right-hand side of the unit. The table below details typical status signals and their meanings:
LED
Meaning…What To Do
Green Solid
The unit is ready to accept a check…insert a check.
Green Flashing
The unit is busy, processing the last check...wait for the job to finish.
Amber Solid
The unit is idle...start the next job with a command from the terminal
Amber Flashing
The unit is sending or receiving information from the terminal...wait.
Red / Green /
Amber Flashing
The unit is starting up or performing diagnostics ...wait.
Red Solid
The unit failed during a self-test… check the terminal display for instructions / refer to your
local procedures / call your distributor (reseller).
Red Flashing
An error occurred during processing. See “Sound Signals” on the next page for details....
check the terminal display for instructions / refer to your local procedures / call your
distributor (reseller).
Green with short
Red Flashes
The unit has detected excessive electromagnetic interference that may impact MICR reading
performance. Move the unit or source of interference until the LED glows solid green
