Unisto Manta, User Manual

Page: 8 / 32

8
Preparation
Manta Hasp Fitting –
fixed end
One end of the wire hasp must be per-
manently fixed into the reinforcer plate
of Unisto Manta.
First remove the two locking screws on the
left and right side of the locking handle.
Then turn the locking handle either to the
left or right.
Release the socket head screw in the rein-
forcement plate with the Allen key.
Remove the screw and slide over the retain-
ing cover to give space for the wire hasp.
Place one end of the wire hasp into the open
cavity as shown above.
1
2
3
4