Unistellar eVscope 2, User Manual, Page: 23 / 40

U
ser
guide
|
23
E
nglish
If the dark cross looks as
shown here, your mirror
alignment is correct If the dark cross looks as shown
here, you need to realign your
mirror
REPEAT THE PROCEDURE UNTIL THE CROSS LOOKS CENTERED.
THIS MIGHT TAKE SEVERAL TRIES.
Rotate the focusing wheel to align the visual cue.
Move toward a target and enjoy the view.
Scan this QR code to be redirected to our
video on how to collimate your eVscope 2
Be careful with the screws. If you are a novice,
take your time and go step by step.
Take the torx key (T20) in
the toolbox (Telescope
Tool 1)
Move the telescope
with the joystick using
the arrows to put the
star at the edge of your
screen . Which edge ?
it all depends on your
cross : if you see the
off center cross on the
right you will place the
star on the right edge
of the screen with the
joystick, if the off center
cross is on the left you
will place the start on
the left edge etc.
Once the start is
on the correct side,
turn the vertical or
horizontal screw in
the mirror mount
with the torx key T20
(Telescope Tool 1) to
adjust the mirror and
recenter the star on
the screen and the
eyepiece.