UNISource Corporation FC-8030, Operation Manual

Page: 5 / 22

6
1-2. Technical Specifications
INPUT A CHARACTERISTICS
•
FREQUENCY RANGE : 0.1Hz to 100MHz (DC Coupled)
30Hz to 100MHz (AC Coupled)
•
SENSITIVITY : 0.1Hz to 100MHz: 30mV
•
COUPLING : AC or DC Selectable
•
IMPEDANCE : 1 M
Ω
Resistance, Shunted by < 40pF
•
ATTENUATOR : x 1 or x 10 Switch Selectable
•
LOW PASS FILTER : -3dB Point of 100KHz, Switch Selectable
•
TRIGGER LEVEL : + 350mV to - 350mV (PRESET 0V)
<FC-8150U, FC-8030U only>
••••
SLOPE : Positive or Negative Slope Switch Selectable
< FC-8150U, FC-8030U only>
* NOTE: Trigger error is typically
±
0.3% of reading by the number of cycles
averaged for input signals having better than 40dB S/N ratio and greater than
100mV amplitude.
••••
RESOLUTION AND NUMBER OF DISPLAYED DIGIT
Time Base Selector INT EXT INT EXT INT EXT INT EXT
Gate Time 0.01S 0.1S 1S 10S
Number Of Displayed Digit 5 6 6 7 7 8 8 9
Frequency (Input A,B) RESOLUTION
0.1 Hz-0.99 Hz
10 uHz 1 uHz 1 uHz 0.1 uHz 0.1 uHz 10nHz 10nHz 1nHz
1 Hz-9.9 Hz
0.1 mHz 10 uHz 10 uHz 1 uHz 1 uHz 0.1 uHz 0.1 uHz 10nHz
10 Hz-99 Hz
1 mHZ 0.1 mHz 0.1 mHz 10 uHz 10 uHz 1 uHz 1 uHz 0.1 uHz
100 Hz-999 Hz
10 mHz 1 mHz 1 mHz 0.1 mHz 0.1 mHz 10 uHz 10 uHz 1 uHz
1 KHz-9.9 KHz
0.1 Hz 10 mHz 10 mHz 1 mHz 1 mHz 0.1 mHz 0.1 mHz 10 uHz
10 KHz-99 KHz
1 Hz 0.1 Hz 0.1 Hz 10 mHz 10 mHz 1 mHz 1 mHZ 0.1 mHz
100 KHz-999 KHz
10 Hz 1 Hz 1 Hz 0.1 Hz 0.1 Hz 10 mHz 10 mHz 1 mHZ
1 MHz-9.9 MHz
100 Hz 10 Hz 10 Hz 1 Hz Hz 0.1 Hz 0.1 Hz 10 mHz
10 MHz-99 MHz
1 KHz 100 Hz 100 Hz 10 Hz 10 Hz 1 Hz 1 Hz 0.1 Hz
100 MHz
10 KHz 1 KHz 1 KHz 100 Hz 100 Hz 10 Hz 10 Hz 1 Hz
•
ACCURACY :
±
Time base Error
±
Resolution(Table 1)
•
PERIOD RANGE : 10 nS to 10 S
•
DISPLAY : n. u. m., Sec with decimal point
•
TOTAL RANGE : DC to 30 MHz
CAPACITY : 0 to 999 999 999
OVER FLOW : “OF”
•
RPM RANGE : 6 to 600 x 10
7
RPM , OVER FLOW : “OF”
<FC-8150,FC-8030,FC-8300 only>
www. .com
information@itm.com 1.800.561.8187