Unison Research Unico Due, Manual

Page: 21 / 28

Unison Research

Unico Due
19
6. SPECIAL FUNCTIONS
BALANCE Pressing and holding the volume knob for a few
seconds allows the channel balance to be adjusted. The
display shows the current balance setting as follows:
the first digit shows the left channel level and the
second digit shows the right channel level. Turn the
volume knob to modify the balance levels.
AV MODE The AV function allows you to connect your Unico
Due to an AV playback system. You can select the AV
input and set a pre-set volume level. Once set, pressing
the "Push" button on the
Unico Due remote control
will switch the unit to the AV input selected at the
volume level previously stored.
Setting the AV function :

Select the desired channel and volume using the input selector and volume
knobs.

Press and hold the selector knob, activating the monitor

Press the OSD button until the display flashes

Release the OSD button
The AV input is now set. Pressing the "push" button on the Unico Due remote
control will automatically switch to the selected channel at the selected volume.
Disabling the AV function :

Put the Unico Due in mute with a short press of the volume knob

Press and hold the selector knob, activating the monitor

Press the OSD button until the display flashes

Release the button
Now pressing the push button on the remote will not do anything.