Unison Research
Unico CD
16
LOADING A DISC
In case no disc is present on the tray after the warm up countdown ends, the
Unison Research
®
UN logo is displayed on the LCD screen.
It is possible to open the CD drawer mechanism pushing the
EJECT
button
on the remote handset or on the front panel, insert a CD, and then close the
drawer pushing again the
EJECT
button.
Once the control of the CD content has been performed and the table of
contents has been read (the display shows the message
LOADING
), the
units is ready: the display shows the message
STOP
, the total number of
the tracks and the total time of the recording.
In case the loaded disc doesn’t contain valid audio information, the display
shows the Unison Research
®
UN logo and the CD player stands by until the
user changes the disc.
IMPORTANT! Even though the
Unico CD
drawer mechanism allows to
be closed simply pushing it back, we highly recommend not to force it: if
done regularly, this could cause malfunctioning and damages.
TRACK SELECTION
PLAY
Once the CD has been loaded successfully, simply
push the
/
PLAY/STOP
button on the front panel or
the
/
PLAY/PAUSE
button on the remote handset to
start the disc spinning and play the music. On the
display are shown the message
PLAY
, the
current track number and the elapsed time.
NEXT TRACK
If you want to jump to the next track, push the
NEXT
button on the front panel: the message
NEXT
is
displayed and the reproduction starts from the
beginning of the next track.
SCAN FWD
If you keep the same button pushed for one second,
the player scans the disc forward starting from the
current position while providing an audible signal to
make it easier to identify the position within the
track. The message
FF
is displayed. When the
button is released, the music starts playing from the
reached position.
