Unison Research
Unico 150
16
The
Unico150
has two LEDs that provide the user with important
information about the operating condition of the amplifier.
INPUT LED
AND
VOLUME LED
ON:
Indicates normal operation
INPUT LED
AND
VOLUME LED
BLINKING (fast):
Indicates automatic start-up phase (approx 40 seconds)
INPUT LED
AND
VOLUME LED
BLINKING (slow):
Indicates the unit is too hot and the thermal protection device has
intervened, which means the power stage has been switched off.
When the internal temperature has returned to normal, the amplifier
will switch on automatically and repeat the initial start-up phase. It is
advisable to switch off the amplifier if the thermal protection device
intervenes; this will speed up the return to normal operation
.
INPUT LED
ON
AND VOLUME LED
BLINKING:
Indicates that the amplifier is receiving a signal from the IR remote
control (adjusting volume).
If there is a temporary loss of mains electricity (even for a very short
duration) the amplifier will restart in automatic start-up mode.
REMOTE CONTROL
Unison Research amplifiers are supplied with a high-quality
infrared remote control.
Your remote control handset is fitted with a CR2032 battery – 3V
(lithium battery).
IMPORTANT!
The remote control supplied with the
Unico 150
only allows for volume attenuation by pressing the ‘
Vol –’
and
‘
Vol +’
buttons.
Summary of Contents for Unico 50
Page 1: ......
