OPERATING MANUAL FOR
KENTUCKY HOT
9
6
MAINTENANCE
Showcase does not require any special maintenance. However, it must be kept clean and remove the residues of exhibited
goods and other contaminants.
Instructions for maintenance are obligatory to follow, otherwise void the warranty. Just regular maintenance windows and
following all instructions is to ensure its long life and trouble-free function.
Before starting any maintenance or service work the showcase must be disconnected from the electricity supply by pulling
the power plug from the socket, otherwise there is a danger of electric voltage!
Before starting any maintenance or service work the responsible person must be thoroughly familiar with all instructions,
prohibitions and recommendations contained in chapter 4.
Damage caused by improper cleaning and maintenance is not covered by warranty.
Elements that were set by the manufacturer or authorized service agent must not be adjusted by the user.
Do not clean the unit while it is hot to prevent burns and unwanted chemical reaction!
Plan of maintenance:
INTERVAL
PART
ACTION
DETAILS
Daily
Exhibition space, shelves, containers and glass
Cleaning
6.1
Weekly
Inner space, fan’s grid container, water tray
Cleaning
6.2
Regularly
The power supply cable
Control
6.3
Space around and under unit
Cleaning
6.1
Daily maintenance
Daily clearing of exhibition space
from the remnants of the exhibited goods includes:
• Disconnecting the device from power supply.
• Emptying showcase to reach room temperature inside.
• Sweeping or vacuuming of the crumbs.
• Removing and cleaning the containers.
• Washing with damp cloth or towel.
When cleaning, do not use aggressive cleaning agents or sharp objects. The abrasive and corrosive liquids are not allowed!
Never use water stream when cleaning inside and outside parts of unit, there is a risk of electrical short circuits and electric
shock.
• If it is necessary to polish the front glass and rear doors by ordinary detergent, leave the door open to exhibition space
until the showcase dries up completely to prevent mold and unwanted odors.
6.2
Weekly maintenance
• Disconnect the showcase from power supply.
• Empty showcase and let it reach room temperature.
• Remove the containers and water tray.
• Clean entire inner space and unit components (eg. containers, water
tray, vent strips).
• Clean the protective grid of fan. The removable grid container is
located above the fan from inside of unit (see the picture). Do not
forget to put the grid back after cleaning.
Never use wire brushes and other sharp objects that could damage
the grids or stainless steel plates.
