OPERATING MANUAL FOR
BIGHORN
9
6
MAINTENANCE
Showcase does not require any special maintenance. However, it must be kept clean and remove the residues of exhibited
goods and other contaminants.
Instructions for maintenance are obligatory to follow, otherwise void the warranty. Just regular maintenance windows and
following all instructions is to ensure its long life and trouble-free function.
Before starting any maintenance or service work the showcase must be disconnected from the electricity supply by pulling
the power plug from the socket, otherwise there is a danger of electric voltage!
Before starting any maintenance or service work the responsible person must be thoroughly familiar with all instructions,
prohibitions and recommendations contained in chapter 4.
Damage caused by improper cleaning and maintenance is not covered by warranty.
Elements that were set by the manufacturer or authorized service agent must not be adjusted by the user.
Plan of maintenance:
6.1
Daily maintenance
Daily clearing of exhibition space
from the remnants of the exhibited goods includes:
• Disconnecting the device from power supply.
• Sweeping or vacuuming of the crumbs.
• Washing with damp cloth or towel.
When cleaning, do not use aggressive cleaning agents or sharp objects. The abrasive and corrosive liquids are not allowed!
Never use water stream when cleaning inside and outside parts of unit, there is a risk of electrical short circuits and electric
shock.
• If it is necessary to polish the front glass and rear doors by ordinary detergent, leave the door open to exhibition space
until the showcase dries up completely to prevent mold and unwanted odors.
6.2
Monthly maintenance
Dirt can impede the exchange of heat between the condenser and the environment, which causes an increase in electricity
consumption and shortens the life of the compressor. Thus,
each month clean the condenser
:
Cover grid of condenser
• Unscrew and remove the cover grille.
1
