background image

21

To Convert and/or Adjust to Natural Gas

The range is set for use with Liquefied Petroleum (LP). The factory setting is indicated 

on the serial plate. When set for LP Gas operation, the pressure regulator will regulate 

the gas to 10 inches water column pressure. When set for Natural Gas operation, the 

pressure regulator will regulate the pressure to 4 inches water column.

Liquid Propane Gas Conversion to Natural Gas

The conversion kit must be installed by qualified service agency. 

GAS RANGE CONVERSION

 

WARNING

 

 

“This conversion kit shall be installed by a qualified service agency in accordance 

with the manufacturer’s instructions and all applicable codes and requirements 

of the authority having jurisdiction. If the information in these instructions is not 

followed exactly, a fire, explosion or production of carbon monoxide may result 

in property damage, personal injury or loss of life. The qualified service agency is 

responsible for the proper installation of this kit. The installation is not proper and 

complete until the operation of the converted appliances is checked as specified 

in the manufacturer’s instructions supplied with the kit.” 

2.  

UGP-30G OF1

NOZZLE (NG)

RL

1.35

1.35

0.8

1.5

RR

FL

FR

OVEN

1.9

1.  

3. 

4. 

Parts List: 

1. Nozzles

2.  Tool Card

3. Tool

4.  Pilot Orifice

Model Number:  

UGP 30G OF2 S/S

Summary of Contents for UGP-30G


















































Reviews: