U N I Q U E U G P 3
16
Door Removal & Reversal Instructions
This appliance has the capability of either opening the door from the left or right side.
The unit is delivered to you with the door opening from the left side, to the right. Should
you desire to reverse the opening direction, please follow the following instructions.
NOTE: All parts removed must be saved to do the re- install the door.
How to reverse the door: Figure #3.
1.
Remove the lower hinge by loosening and removing the screws with
screwdriver, (2) position.(Figure #3)
2.
Carefully lower the door and remove it.
3.
Remove the three screws from the left top hinge (1) position; take the plastic
part off the hinge position.
4.
Remove the three screws from the right top hinge and take off the hinge,
insert the plastic part, rivet the three screws thereafter.
5.
Take off the lower hinge and fix it to the opposite side.
6.
Take the door. Insert the lower hinge axle into the right bottom hole of the
door.
7.
Fix the spare hinge to the left top position of the cabinet. Adjust the door;
make it straight and in alignment with the cabinet.
Note: As the door gasket gets pressed-in during shipment, after reversing the door the
gasket might have to be reset. If there is a gap between the cabinet and the door gasket,
set the gasket by gently pulling it out to seal the gap. If necessary, you can also use a hair
dryer or hot water to warm the gasket to get rid of the gap.
Chapter
5
