24
18. With a 7 mm wrench or pliers remove the orifice and replace with NG orifice.
19. Replace the burner tube, then start up the oven to check oven flame, making sure
the back of the burner tube to achieve this. Once you have the bottom pan and oven
door closed, and with the broiler drawer pulled down, you will be able to see how
the flame should look by viewing the flame through the broiler door area.
20. Check for leaks using a leak detector or soapy water with recommended ratio of
75% water, 25% dish washing soap.
21. Once you have completed the conversion, check the operations of ignition making
sure each of the 4 burners, pilot flame and oven burner flame are functioning
correctly. Please refer to pages 21 through 24.
GAS RANGE CONVERSION (continued)
OVEN ORIFICE
In the pilot assembly shown below, the LPG orifice is
0.14 mm. When doing the conversion from Propane to
Natural gas make sure the pilot orifice is changed to
the NG orifice sized at 0.2 mm. If you leave the LPG
orifice 0.14 mm in place, the pilot flame will may be too
small to keep the pilot lit.
PILOT ORIFICE
ORIFICE
WRENCH
THERMOCOUPLE
IGNITER
OVEN PILOT
PILOT ORIFICE