5
throttle and elevator, then calibration finished.
8
： 断开电池电源
Disconnect the power.
9
：拔掉校准线
Pull out the calibration wire.
10
：再次连接电池
Connect the battery again.
11
：检查各通道反正舵面是否正确
方法是：左打副翼摇杆，左边副翼舵面上翘为正确
右打副翼摇杆，右边副翼舵面上翘为正确
下拉升降摇杆，升降舵面上翘为正确
上推升降摇杆，升降舵面下翘为正确
Check each channel if it is correct.
Checking method:
Pull the aileron to the left, and then the left aileron surface will turn up. Pull the aileron
to the right, the right aileron surface will turn up. Pull down the elevator, the elevator
surface will turn up. Pull up the elevator, elevator surface will turn down.
12
：检查固定翼状态各舵面陀螺纠错舵面是否正确
方法是：飞机左倾斜，左边机翼低，右边的副翼舵面上翘为正确。
飞机右倾斜，右边机翼低，左边的副翼舵面上翘为正确。
飞机俯冲，机头低，升降舵面会向上翘为正确。
飞机抬头爬升，机头抬高，升降舵面向下翘为正确。
Check the gyro error correction surface if it is right under fixed wing mold.
Checking method:
When plane turns left, the left wing is lower, right aileron surface should turn up, when
plane turns right, the right wing is lower, left aileron surface should turn up. When the
plane dives, the nose is lower, the elevator surface should go upward. When climbing,
nose turns up, the elevator surface should go downward.
13
：检查油门解锁，和上锁是否正常
方法： 向右打满方向舵遥控器摇杆
5
秒钟后，机翼灯亮为解锁，油门可以使用
向左打满方向舵遥控器摇杆
5
秒钟后，机翼灯熄灭，油门不可以使用
Check the throttle lock and unlock if they are correct.
Checking method:
After you pull the throttle to the right at biggest for 5 seconds, the wing LED lights, the
throttle is unlock. Pull the throttle to the left at biggest for 5 seconds, then the wing
LED goes out, the throttle is locked.