COPYRIGHT 2016, UNIQUE AUTOMATION
- 6 -
08/11/2016 12:57
Changing a preset
To change the values of a preset press
and using the / buttons select the
presets you wish to alter. Button
takes you to the preset variables one by one
starting with Temperature, followed by depth, etc. To increase/decrease the value
of a variable use / . The button takes you a step back.
At any time you can run the altered preset without saving it, just press
, which
takes you back to the list of preset and press again for filling to take place.
Saving a preset
Following the process above alter the variables of a preset and end the process by
scrolling to the Store preset line and using store the preset or using store the
preset and go back to the preset menu.
Temperature
38ºC
Presets
Preset One
Depth
75%
-
+
Disp: 1
0 drops
Disp: 2
0 drops
Disp: 3
35 drops
Disp: 6 0 drops
Disp: 4
0 drops
Disp: 5
0 drops
Disp: 12 0 drops
Store preset
-
+
