UniqAir PRO, User Manual

Page: 9 / 20

U n i q A i r | 7
3.2 Positioning the device
Equipped with wheels, the UniqAir PRO is easy to place anywhere in a
room.
To ensure the greatest effectiveness, make sure that the air flow is as
unobstructed as possible in front and on the sides of the device. If possible,
place the device so that no wall, cabinet or other furniture impedes airflow
in the vicinity of the device.
NOTE! The device is intended for use in an upright position only. Keep the
air cleaner upright on its wheels during operation and transfer.
3.3 Connecting the power cord
Follow these steps to connect the power cord:
1. Open the top cover of the device by lifting the cover from the edge.
2. Take the power cord out from below the cover.
3. Check that the power cord is externally intact.
WARNING! Electrical safety hazard. Only use an intact power cord to
connect the device. If the cord is damaged, contact UniqAir Customer
Service.
4. Connect the power cord to the connector on the bottom of the
device.
NOTE! Due to the type of connector, the cable can only be connected in
one way. Do not force the power cord into the connector.
5. Plug the other end of the power cord into a grounded electrical
outlet.
NOTE! The mains voltage of the outlet must correspond to the voltage
indicated on the type plate.
WARNING! Electrical safety hazard. Only connect the appliance to a
grounded outlet.
6. The device will turn on after a few moments, if the power cord is
connected properly.