21
3
Setting Procedures
21
Setting Procedures
Chapter
3
Calibration settings
Setting related to calibration is performed.
Refer to P.29 "4-3.Procedures of equivalent input calibration and actual load calibration (torque)"
for description related to these values.
"Set" button
Calibration setting values are written to the
TM201 all at once.
When this button is clicked, a confirmation
dialog to overwrite is displayed, and click "Yes
(Y)".
Calibration
Torque calibration is performed.
Refer to P.29 "4-3.Procedures of equivalent input calibration and actual load calibration (torque)"
for the description.
Rotation speed
Unit of rotation speed is specified.
This setting is used only in displaying this application and is not
applied to the TM201.
<Setting value>
rpm, min-1
