STOP WATCH ANALYSE
The Stop Watch Analyse mode is for looking at the lap and split times for the session you just
timed.
On the menu line you will see the driver’s numbers to the right.
This is important to know because it is the same buttons you
need to use to scroll through the laps.
The stop watch analyse screen will automatically start with the
best lap for each driver.
If no split times have been recorded, the corresponding line will
be empty.
You can adjust the drivers lap number number by pressing the L1 – L4 button. To adjust the
drivers split number you can press the S1 – S4 button. The lap and split numbers will always
be increased when pressing L1 – L4 and S1 – S4. If you want to decrease the numbers, please
press and hold down the OK button while operating the L1 – L4 and S1 - S4 buttons.
Analyse popup menu
While operating in analyse mode, you can bring up a popup
menu. Simply press the MENU button and you will see the
menu shown on the picture. If you press the MENU button
again or the LEFT arrow button, the popup menu will disappear
again. Otherwise use the up and down buttons (L4 and S4) to
select the menu point you want and press OK.
From the popup menu you will be able to do the following.
•
Clear all laps
•
Get more information, e.g. theoretical lap time and more
•
Go to the “Main menu”
UNIPRO – The original Laptimer
13
