The wheel sensor
The sensor fitting is mounted in a suitable hole in the
stub axle. Depending on the kart model, it can be
necessary to drill a hole in the stub axle.
If you mount the fitting so the edge is 35-40 mm from
the sensor disc, you will be able to make some
adjustment on the sensor without having to move the
fitting.
Mount the sensor in the fitting so the distance between
the sensor and the sensor disc is between 3 and 10
millimeters.
If you experience problems with the speed, this distance
is the first thing to check!
The cable is fixed to the frame in a nice large curve so
the wheel can turn without the cable being caught or
tightened.
Remember to make the loop large enough to allow
adjustment of the sensor when you change the front
width of the kart.
Fix the cable to the frame with strips all the way to the
Main Box. The cable is mounted in the connector named
WHEEL on the Main Box. Tighten the connector hard
with your fingers.
UNIPRO – The original Laptimer
11
