background image

Page 6

PDUAC3U SERIES

OPERATING MANUAL

P O W E R I N G   T E C H N O L O G Y

Manual No. pduac3u-3

pduac3u-man-rev3-0317.indd

4.0   SAFETY & INDUSTRY STANDARDS

4.1

  PDUAC3U Series power distribution panels meet the following safety 

requirements: 

  

STANDARD

  

UL60950-1, 2nd Edition

 

 

CSA22.2 No. 60950-1, 2nd Edition

 

 

EN60950-1, 2nd Edition

4.2

  PDUAC3U Series power distribution units (PDU) are CE marked to indicate 

conformance to the European Union’s Low Voltage Directive.

4.3

  These PDUs operate at voltages that could potentially be hazardous.  

Furthermore, inadvertent short circuiting by mis-connection or other error 

could be harmful.  This product should be handled, tested and installed only 

by qualified technical persons who are trained in the use of power systems 

and are well aware of the hazards involved.

4.4

  All connections to the PDU should be carefully checked for errors before 

applying power to them.

4.5

 

The internal voltages may be at hazardous potentials.  The top cover should 

not be removed.  There are no user-serviceable components in these units. 

 

Removing the top cover will void the warranty.

5.0   WARRANTY (summary)

PDUAC3U Series PDUs are warranted for two (2) years from date of shipment against defects 

in material and workmanship.  This warranty does not extend to products which have been 

opened, altered or repaired by persons other than persons authorized by the manufacturer or 

to products which become defective due to acts of God, negligence or the failure of customer 

to fully follow instructions with respect to installation, application or maintenance.

For a complete text of UNIPOWER’s warranty conditions please request a copy from your 

local Sales Office.

Summary of Contents for PDUAC3U-120-08














Reviews: