ATMOS Operation Manual
page 19/24
“ReadATMOS” program
ReadATMOS is a program which allows downloading data from the ATMOS instrument via a USB cable.
Download the “ReadATMOS” program from the website
https://www.unipix-atmos.com/atmos/downloads/
.
!! Make sure to download the correct version corresponding to the firmware of your device!!
The firmware version is shown on the starting screen in the lower left corner when the ATMOS device is switched
on. It can also be found under “Info” (Gear symbol on the main screen, then “Info”).
Firmware V2023-V3.0 and above
Verify that your ATMOS device is
connected
to the computer and
turned on
. Then start “ReadATMOS” (V3.0) on
your computer. The following window appears.
Click the “Read ATMOS” button.
A new window will show up and you will be asked for a name and location for your Excel file. Please select the
storage location and enter a file name. Then click “Save”.
After pushing the
“Save”.
button, the
“ReadATMOS”.
program will download data from ATMOS. The blue bar
shows the progress.
When the download is finished, you can quit the program and open the Excel sheet.
Data will be presented like the following example:
