4
Image 2.
Image 3.
Image 4.
Image 5.
Page 1: ...g to the ground Maintenance Due to exposure to various weather conditions some parts of the stand Tools Pump require constant maintenance Tools We recommend oiling tools with Dry Lube PTFE at least once a month if necessary several times a month In winter we recommend Wet Lube once a week Pump We recommend lubricating Handle stick with Dry Lube or PTFE spray 1 2 times a month In winter repeat the ...
Page 2: ...coated 1 4m 625525 1693E WIRECL Aluminum wire clamp 625526 1693E RUBB01 Protective rubber for Tool hole 625527 1693E ENDCAP01 Outer plastic end cap for bike hanger 625528 1693E ENDCAP02 Inner plastic end cap for bike hanger 625529 1693E UVCOVER1 UV rubber cover for bike hanger transparent 14cm 625530 1693E TOPCAP1 Plastic top cap CNC made 625531 1693E PCOVER1 Protection cover for pump galvanized p...
Page 3: ...move the metal plate under the pump image 2 3 Keeping the complete frame and pump upside down pull the plastic part from the pump image 3 4 Remove the pump from the metal frame 5 Change the rubber washer or change the pump 6 Install the pump into the frame 7 Install the metal plate on the floor bottom with 4 screws image 4 8 Use a rivet gun and 10 new blind rivets to install the pump frame back on...
Page 4: ...4 Image 2 Image 3 Image 4 Image 5 ...
