3
Pump maintenance and replacement
To replace or maintain the pump, follow these steps:
1)
With a drill, remove ten rivets
–
6 from the side, 4 from the bottom, to separate the pump frame from the
main frame. Use drill 4.2mm. (image 1)
2)
Unscrew the bottom 4 screws to remove the metal plate under the pump (image 2)
3)
Keeping the complete frame and pump upside down, pull the plastic part from the pump (image 3)
4)
Remove the pump from the metal frame
5)
Change the rubber washer or change the pump
6)
Install the pump into the frame
7)
Install the metal plate on the floor bottom with 4 screws (image 4)
8)
Use a rivet gun and 10 new blind rivets to install the pump frame back on the stand main frame. Rivet
dimension 4 x 9mm. (image 5)
Image 1.