background image

Installation Guide 

71 

Cleaning Faceplates 

The equipment must be cleaned only with a soft cloth and neutral soap product. Do 
not use solvents.  

Handling the Memory Cards 

The SSFDC memory cards used in some of the UniOP operator panels need to be 
handled with care when replaced in the memory slot of the panel. 
 

 

 

Figure 52 – SSFDC memory card 

 
Before inserting the memory card in its slot in the panel, the contact area must be 
verified to be clean. Any track of contaminants such as oil or any greasy substances 
should be carefully removed. 
 
Contamination on the golden contacts of the memory card, at the moment the media 
is inserted in the slot, may generate an insulating layer that may result in electrical 
contact problems with the sliding elements of the socket. 
 
Corrosive / active chemicals may permanently damage the memory card golden 
surface. Any contact with such substances must be carefully avoided. 
 
To ensure the proper operation of the memory media the contact surface of the 
SSFDC card should be cleaned with a soft, clean tissue. 

Note: The use of any synthetic cloth could permanently damage the memory 
card due to electrostatic discharge. 

 
Direct contact with the human body (fingers) with the contact area should be 
carefully avoided. 

StockCheck.com

 Downloaded from StockCheck.com

Summary of Contents for BKDC-16


















































































Reviews: