Union Instruments INCA6004, Translation Of The Original Operating Instructions

Page: 5 / 67

5
Technical data
Gas inlets
Number of measuring points,
dry: 1 - 4
Number of measuring points,
wet: 1
Calibration inlets: 1
Purge gas inlets: 1
Gas connections: Clamp ring connection 6 mm
Max. distance between
measuring point and
analyser: 10 m
Max. gas inlet pressure: 20 mbar relative (optional 300 mbar)
Min. gas inlet pressure: -100 mbar relative
Flame arrester: ATEX certification G IIC
Relative gas humidity:
≤ 100% (condensate possible)
Condensate trap: yes
Calibration gas
Calibration interval: manual or automatic (configurable between one
hour and up to several weeks)
Duration of calibration: 10 minutes (recommended by the manufacturer)
Gas consumption: 5 l/calibration
Power supply
Voltage: 100 - 240 V 50/60 Hz
Power consumption: max. 1500 VA with optional second heater
Protection class: I
Degree of protection IP54
Interfaces
Relay: 3
Dig. interface: RS232
Field bus: optional
Optional relay: optional
Remote control unit: optional
Sample gas cooler
Cooling principle: thermoelectric
Dew point: 3 - 30 °C adjustable
Condensate drain: Hose pump
Ambient conditions
Operating temperature: -20 - 45 °C
Humidity: 100% relative humidity
Ambient pressure: 900 - 1250 hPa (0.9 - 1.2 bar)
Storage temperature: -20 - 60°C