7. Serial
Cable
Connection
To allow for unattended system shutdown for your operating system,
connect the RS-232 serial cable as per diagram below. For the USB serial
cable, just simply plug into the UPS and PC and it will be auto detected.
8. Turn
On/Off
Press power switch to turn on the CiTO Power UPS. Press power switch
again to turn off the UPS.
9. DC Start Function
DC Start Function enables UPS to be started up when AC utility power is
not available and battery is fully charged. Just simply press the power
switch to turn on the UPS.
10. Battery Replacement
CAUTION: Battery replacement should be performed by qualified
service personnel.
Follow the charts below to replace the batteries.
Step1: Remove the screws located on the bottom of the UPS to open the
battery cover.
Chart 1
