KOOLZONE
7
Heat Exust Duct
Cooling Duct
Control Panel
Curved Duct
Service Cover
Caster Wheel
Drain Tank (5L)
Raised Nub
Notch / Molded Arrow
Slotted Black Line
Slot
Curved Duct
Cooling Duct
Cold Air Exit
4. PARTS OF THE MACHINE
5. INSTALLATION
•
INSTALLING THE CURVED DUCT
Make sure the notch part (molded arrow on duct) lines up with the slotted black line in the
cold air exit. Install and turn to center the curved duct with the front of the unit.
•
INSTALLING THE COOLING DUCT
Slide the cooling duct raised nub into the slot of the curved duct. Then turn clockwise to lock.
Make sure the duct is connected properly before using. When adjusting the direction, turn the curved
duct instead of the cooling duct.
Cooling Duct Installation
