5. Plastic seal removed. NOTE: Empty as much toner possible,
before using compressed air to clean the cartridge.
6. With the blue handle in the locked position, the trap door on
the waste section (pictured) would rotate clockwise to the
open position, allowing you to blow out all the waste toner from
the chamber.
7. Once the cartridge has been thoroughly cleaned reseal the
waste opening and turn the blue handle onto the unlocked
position to close the feed section. Fill the toner hopper with the
adequate amount and install the black plug.
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
OKIDATA C5500/5600/5700/5800/5900/6000/6100 CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Summit Technologies is a division of UniNet Imaging Inc.
w w w.
u n i n e t
i m a g i n g . c o m
USA
•
UK
•
EUROPE
•
AFRICA
•
JAPAN
•
CHINA
•
BRAZIL
•
MEXICO
•
COLOMBIA
•
ARGENTINA
•
VENEZUELA
11124 Washington Blvd., Culver City, CA, U.S.A. 90232
•
Ph +1 310 280 9620
•
Fx +1 310 838 7294
•
NOTES
