TONER HOPPER SECTION
1. Remove the fill plug by using a small flat head screwdriver
to pry it off (as shown).
2. Press down on the locking tab to allow the blue handle to
rotate to the locked position which opens the feed section.
Now you can clean the toner section of the cartridge.
3. Remove the gear cover by using a small flat head screw driv-
er to pry the cover off.
4. Complete removal of the waste section seal cannot be
accomplished unless the blue handle is pulled out several mil-
limeters and the small white gear is remove. The next best
thing is to cut half the plastic seal in the middle and uncover-
ing one of the holes on the waste section.
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
OKIDATA C5500/5600/5700/5800/5900/6000/6100 CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Summit Technologies is a division of UniNet Imaging Inc.
w w w.
u n i n e t
i m a g i n g . c o m
USA
•
UK
•
EUROPE
•
AFRICA
•
JAPAN
•
CHINA
•
BRAZIL
•
MEXICO
•
COLOMBIA
•
ARGENTINA
•
VENEZUELA
11124 Washington Blvd., Culver City, CA, U.S.A. 90232
•
Ph +1 310 280 9620
•
Fx +1 310 838 7294
•
