KONICA MINOLTA MAGICOLOR 4600 SERIES TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com
3. Slide the port cover over and remove the third screw.
Remove the end cap.
4. Remove the fill plug and clean out any remaining toner.
This fill plug is very soft. Be careful not to put a hole in it.
5. When a seal is available, install it now.
6. Turn the cartridge so the port opening is facing up and fill
the cartridge with dedicated MC 4600 color toner. Replace the
fill plug.
