Maintenance Manual
19
programmed for 30 different IDs and names using by PC programmer.
The radio enters Call mode when pressing the “F3” and “F1” button simultaneously during the standby
mode. The radio returns the standby mode when pressing the “F4” button.
When the Call mode is activated then call IDs are displayed on the LCD and change next IDs using by
channel select switch.
Individual Call
Enters the Call mode using by press the “F3” and “F1” buttons simultaneously.
Select the Call ID that the user wants to communicate.
To initiate a call, the user press the “F1” button then the radio transmits the calling signal. And the
caller’s ID was displayed on receiving radio. The receiving radio enters the Call mode when
receives the calling signal.
Individual Communication
Enters the Call mode using by press the “F3” and “F1” buttons simultaneously.
Select the Call ID that the user wants to communicate.
To initiate a communication, the user press the PTT key then the radio transmits the calling signal
after that transmitting the voice.
Group Call
Enters the Call mode using by press the “F3” and “F1” buttons simultaneously.
Select the Group Call ID that the user wants to communicate. The Group IDs can be programmed
using by PC programmer.
To initiate a call, the user press the “F1” button then the radio transmits the calling signal. And the
caller’s Group ID was displayed on receiving radios.
표시
)
Group Communication
Enters the Call mode using by press the “F3” and “F1” buttons simultaneously.
Select the Group Call ID that the user wants to communicate.
To initiate a communication, the user press the PTT key then the radio transmits the calling signal
after that transmitting the voice.
