Unimig RazorCut 45 KUPJRRW45, Operating Manual

Page: 17 / 24

17
Item Part number Description
1 8.253.085 Plastic handle
2 8.301RM.632 Cover
3 7.154.474 Power cable with australian plug
4 7.232.738 Power switch (red)
5 8.462.116 Quick connector
6 8.123RM.190 Back panel
7 8.068RM.632-A Plastic rear panel
8 8.123RM.192 Installation plate of fan
10 7.720.053 Fam
11 8.422RM.129 Heatsink (1)
12 7.411.010 Rectifer
13 8.212.020 Position cap of rectifier
14 8.422RM.130 Heatsink(2)
15 7.231.061 Thermal switch (open)
15 7.231.082-A Thermal switch (open)
16 8.422RM.131 Heatsink(3)
17 7.425RM.001 IGBT transisitor
18 8.422RM.132 Heatsink(4)
19 8.069RM.632-A Plastic front panel
20 W.496RM.185-A Front operation panel
21 8.123RM.191 Cover of front operation panel
22 7.557.031-A Water-proof knob
23 7.458.400 Knob
24 8.123RM.193 output front panel
25 7.152.316 10-25 Dins connector
26 7.132.114 14 pins connector
27 7.667.001 Central connector
28 7.321.130 Current sencor
29 8.055RM.632 Chessis
30 L.185RM.630 Main transformer
31 7.445.335 Resisotr
32 7.401.070 Diode
33 8.422RM.133 Heatsink(5)
34 8.123.636-C The support bar
35 L.271RM.630 PFC inductance
36 7.253.047 Solenoid valve with the three single-action
37 7.232.637 Pressure switch
38 7.253.460 Air regulator
39 8.303RM.632 Partition
40 W.496RM.124-C CUT40/40DV control board
41 W.496RM.175 CUT 40PFC CNC interface
42 7.425.555 IGBT transisitor
43 7.421.541 Diode
44 W.496RM.159-D CUT40PFC main board