Unimig RAZOR MULTI 175, Operating Manual

Page: 22 / 56

22
RAZOR MULTI 175/220
OPERATING MANUAL
17. You can now feed the wire through the torch. Press
the
Wire Feed Button located on the front panel of the
machine. Please maintain positive control of the torch
and point it away from you, ensuring any part of your
persons is not near the tip.
18. Feed extra wire out of the tip of the torch. Then slide
the MIG tip along the wire back into place, screwing
it in to secure it. Then slide the gas nozzle back into
place. Cut the excess wire off just past the gas nozzle.
19. Check the tension by pinching the sides of the wire
past the tip of the torch while wearing a glove. Feed
the wire while applying light pressure with your fingers.
You want the tension to be set just past slippage, so
adjust the tension knob accordingly. Too little pressure
and you will experience slippage. Too much pressure
and you might experience wire birdnesting or feeding
issues. Too much pressure can also deform the wire.
WARNING!
WEAR GLOVES AND DO NOT ATTEMPT TO
PINCH THE TIP OF THE WIRE.
KEEP HANDS CLEAR OF DRIVE ROLLERS
WHEN IN MOTION.