Unimig RAZOR ARC 160 PFC, Operating Manual

Page: 12 / 40

12
RAZOR ARC 160/200 PFC
OPERATING MANUAL
6. Control Panel Details
6.1 MMA 'STICK' Mode
This indicates that the machine is in MMA mode. For MMA setup details see page 15.
6.2 DC LIFT TIG Mode
This indicates that the machine is in Lift Tig mode. For TIG setup details see page 20.
•
Note: When Lift TIG mode is activated, all other functions are disabled except amperage
control and remote mode.
6.3 Manual Mode
This indicicates that the machine is manual MMA mode. While in this mode the machine
sets no limits on amperage MIN/MAX and allows you full control of the Arc Force and Hot
Start settings.
WELDING PROCESS SELECTION
MMA ELECTRODE SIZE SELECTION
6.4 Electrode Pre-Sets
Each off these indicators are for the electrode sizes that the machine is pre-set to weld
with. When one of these are selected, the machine will automatically put limiters on
amperage settings based on recommended MIN/MAX. It will also automatically set the Arc
Force and Hot Start settings based on what works best for the selected size of electrode.