19
9)
Hold the electrode slightly above the
work maintaining the arc while travelling
at an even speed.
10)
To finish the weld, break the arc by
quickly snapping the electrode away from
the work piece.
11)
Wait for the weld to cool and carefully
chip away the slag to reveal the weld
metal below.
Set Up Procedure for MMA (Stick) Welding:
6)
Connect the Earth Clamp securely to
the work piece or the work bench.
7)
Place and clamp an electrode into the
Electrode Hand Piece
8)
Strike the electrode against the work
piece to create an arc, lift slightly and
hold the electrode steady to maintain
the arc
(6)
Select the Ignition Time. Push the key until the Ignition time
icon is illuminated. Set the Ignition time by rotating the Adjustment
Knob. The set Ignition time will show in the Digital Display.
Refer to Page 14 for instruction on Ignition Time.
AC
AC
DC
ALARM
AC PULSE
DC PULSE
DC
Job Recall
Torch Cycle
Volts
ADJUSTMENT
Finish
Current
Start
Current
Peak
Current
Base
Current
Ignition Current
Ignition
Time
Current
Arc Force
ON
Power
Remote
ON/OFF
AC Balance
AC Hz
% Pulse
Pulse Hz
OFF
MMA - Ignition Time Set
(7)
To set the Arc Force push the same key until the Arc Force
icon illuminates. Turn the Adjustment Knob to set the Arc Force,
the set value will be shown on the Digital Display.
Refer to Page 15 for instruction on Arc Force.
MMA - Arc Force Set.
MMA (Stick Electrode) Welding
AC
AC
DC
ALARM
AC PULSE
DC PULSE
DC
Job Recall
Torch Cycle
Volts
ADJUSTMENT
Finish
Current
Start
Current
Peak
Current
Base
Current
Ignition Current
Ignition
Time
Current
Arc Force
ON
Power
Remote
ON/OFF
AC Balance
AC Hz
% Pulse
Pulse Hz
OFF
Razorweld
Razor
weld
™
™
™
™
