•
Mount the drum on the main machine body.
Use 2 screws and the bracket to secure it
in place.
Installation of hot-air gun and setting the
correct position
•
Place the gun with the plastic cover in place
inside the bracket. Make sure the gun is in
the correct position. Tighten the screw of the
clamping bracket so the gun is secured in
place safely.
Placing the band inside the machine
•
Place the spool with the band inside
the machine. Observe the picture.
6
OPERATION
7
•
The band must be always aligned with the axis of
the blue guiding stoppers.
•
Run the band through. Observe the picture.
•
Using the screws make sure that the side band guides keep the band inside the machine. Secure the
screws and the position with safety nuts, located on the jaw sides.
