Multi-Function Sharpener – MFS2
E&OE
© 2017 Unimac
9
Sharpening Chisels
For chisels that are damaged or severely blunted, it may take several uses of the sharpener to
rectify.
1. Insert the chisel sharpening module into the tool.
2. Place the chisel (
A
) on the chisel bed (
B
) so it is hard up against the guide at the end of the bed and
held firmly by the magnets (
C
). For narrow chisels, clip the narrow chisel guide (
D
) to the bed. This
ensure that the chisel can be held by the magnets.
3. Set the required angle of the chisel bed, by loosening the angle adjustment locking screw (
E
), then tilting
the bed to match the existing angle of the chisel bevel (the bed can be set at any angle between 20° and
40°). When set, tighten the locking screw.
4. Position the chisel so it will just contact the grinding wheel (
F
).
5. Switch the tool ON.
6. Evenly and with a light, steady pressure, slide the chisel bed back and forth across the grinding wheel for
the full length of the chisel. Repeat as required, moving the chisel in towards the grinding wheel a small
amount each time, until the chisel has a straight and sharp edge (no chips etc).
7. Repeat the sharpening process for the other side of the chisel.
F
B
A
C
D
E
