Installation Guide | 9
2. Permanent Hold
• To switch back from vacation hold, set a
permanent hold when users return
• Access Internal Parameter Menu. Go to P08.
• Press [
▲
]/[
▼
] until you see “noP”
• Press [center key] to activate Permanent Hold
i.e. No-prg (No Program) and return to Home
screen
• The “P” symbol is visible on the screen
• Permanent Hold maintains a consistent
temperature at all hours of the day
Vacation Hold and Permanent Hold
1. Vacation Hold
• Set Vacation Hold when users are away on
vacation to save energy.
• Access Internal Parameter Menu. Go to P09.
• Press [
▲
]/[
▼
] to adjust Vacation Hold duration,
from 1 ~ 99 days.
• “0” to disable Vacation Hold.
• Press [center key] to confirm and return to
Home screen.
• The person-outside-the-house icon appears on
the screen
• Thermostat resumes to Permanent Hold i.e. No-
Prg (No Program)
• When the vacation is over, thermostat will
return to normal programming
3. Temporary Override
• At any time during a scheduled program, e.g. 7-day program / 5+1+1 program / 1-day program, users
may interrupt the schedule by simply pressing [
▲
]/[
▼
] to override the preset temperature setpoint
• The house symbol disappears. Schedule is temporarily disabled.
• Icon “T” appears. Temporary Override mode.
• Scheduled program resumes at the next cycle
