Unilumin Upad III, Product Manual

Page: 38 / 79

UpadIII product manual
www.unilumin.cn
30
3.5.2 Set Coefficients for a New Module
1) Choose“ Topology or List” function, select the cabinet of new replaced module ,double
click the selected cabinet;
Fig 23
【
Select cabinet section of a new replaced module
】
2)
Set up the size of a module here, when it’s done, find out and select the position of the new
module;
Fig 24
【
Select module section on cabinet
】
Module Size
：
First set up the size of a module here, when it’s done, find out and select the
position of the new module.