TEMPERATURE CONTROL AND PROTECTION SYSTEM
395nm UV LEDs
Ultrasonic
Range Finder
Trigger
Switch
Press & hold for
more than 5 seconds
the display screen will
show the current
temperature of the light
1
2
4
WWW.UNILITE.CO.UK
- Press and hold the button for more than 5
seconds when the Lamp is powered on, the
display screen will show the current temperature
of the lamp.
- The Lamp has a built-in cooling system which will
automatically activate when the lamp temperature
reaches 40°C (104°F) or more.
- When the lamp temperature reaches above 75°C
(167°F) and below 90°C (194°F) , a warning
buzzer will activate and gives an alarm every 30
seconds during the regular working period. The
buzzer will stop when the end of the countdown
shows “ ” or the lamp is turned off manually.
- When the lamp temperature is above 90°C
(194°F) , the lamp will automatically switch off and
the cooling system will keep running until the
temperature drops below 50°C (122°F). The lamp
can not be used during this period until the
temperature is lower than 50°C (122°F) .
- It is recommended that the lamp is allowed to
cool down for few minutes after each cure and
ensure it is switched off . It will ensure that your
equipment cures at optimum efficiency and gives a
longer working life.
1
2
UV-CURE
CURING LAMP
/ 395nm
